16
Operating the Wood Chipper
Operating the Wood Chipper
• You must read and understand all instructions, safety
precautions, and/or warnings listed in “General Safety Rules”
before operating the Wood Chipper.
• When operating the Wood Chipper, make sure you are standing
in the safe OPERATOR ZONE. You must stay in the safe
operating area at all times when the chipper drum is in motion.
Never place any part of your body into a position that causes an
unsafe operating condition.
• Before loading and operating the Wood Chipper, always wear
protective gear, including safety goggles, hearing protection,
tight-fitting gloves without draw strings or loose cuffs, and steel-
toed shoes.
• Knowing the correct and incorrect methods of Chipping woods.
Never using an incorrect or unsafe method.
You must familiarize yourself with the controls and features of your Wood
Chipper before beginning the steps outlined in this chapter. If you have any
doubts or questions about the correct or safe method of performing anything
found in this manual,
please contact WoodMaxx at (855) 966-3629
.
Operator Zone
TOP VIEW
Foot Plate
Engine
Operator
Zone
Operator
Zone
Infeed
To Next Page
Loading...