8
Step 1: Place the crate on a flat
surface.
Setting Up the Wood Chipper
Setting Up the Wood Chipper
Tools you will need:
• 17mm Wrench
• 16mm Wrench or 5/8" Wrench
• 13mm Wrench or 1/2" Wrench
• Phillips Screw Driver
(electric start model only)
• Grease Gun
• Floor Jack
• Block of 4x4
• 35-39 oz. Oil (10W-30 or
5W-30 Synthetic)
Assembly Time - Approximately 2 Hours
Step 2: Fold the metal connecting tabs
of the lower crate section downward
to free the sides of the crate.
Step 3: Remove the crate top by lifting
it up and over.
Step 4: Remove, unpackage, and
inventory all the components.
To Next Page