Parts 41
15914 (Rev. 3/23/2007)
D80-2 FRONT 2/3 OF 3-JOINT DRIVE (SQUARE SHAFT)
22
23
2
21
21
14
1 -- COMPLETE DRIVE
20
20
12
3
19
18
17
16
10
15
13
11
9
8
7
6
3
4
5
CD3873B
NOTE: Two styles of driveshafts have
been used on the D80 series cutters.
Check your driveshaft for square or
two--lobe shaft and order repair parts
from the correct parts list.
REF PART QTY DESCRIPTION
1 19054 1 Front 2/3 of 3-joint drive 35N
2 44919 1 Front 2 joints shielded 35N
3 110 2 U-Joint repair kit 35N
4 117 1 Lock pin and spring
5 115 1 1-3/8 Quick disconnect yoke 35N
6 1251 1 Bearing holder with bearing (includes
7, 8 & 9)
7 12128 1 .062 x 72 mm ID Snap ring
8 3502 1 1.37 ID x 2.83 OD Ball bearing
9 2985* - 1/4 - 28 Threaded 90-degree grease
fitting
10 19036 1 Decaled tube, sleeve & stub, 24.38
11 15952 1 Plastic shield 2.75 x 17.69 (includes
items 12 & 21)
12 15141 4 Bearing for tubular shaft
13 1311 1 1/2 NF x 1 HHCS, drilled head
14 -----* 1 1/2 x 1-1/2 x 1/8 Flat washer
15 105 1 1-5/16 Bore universal joint yoke 35N
16 19043 1 Yoke
17 4674 1 3/8 x 2 Spirol pin
18 19045 1 Shield, decaled 2-joint 21.94
(includes items 20 & 21)
19 4663 1 Square shaft & yoke 35N
20 15740 2 World shield bearing
21 15739 3 World shield tether chain 27.5
22 19609 1 Plastic shield kit (includes items 11 &
23)
23 19038 1 Shield, decaled
* Obtain Locally - Standard Hardware
REF PART QTY DESCRIPTION
To Next Page
Loading...
