Woods D80-2 - D80-2 3-1;2 X 8 Hydraulic Cylinder #10475 (Optional)

54 Parts
15914 (Rev. 3/23/2007)
D80-2 3-1/2 X 8" HYDRAULIC CYLINDER #10475 (OPTIONAL)
DC1105
REF PART QTY DESCRIPTION
1 ----- - Not available
2 26340 1 Seal kit (includes 2A thru 2G)
2A † 1 1-1/4 ID Wiper seal
2B † 1 Rod back-up ring
2C † 2 1-1/4 ID O-ring
2D † 2 3/16 x 3-1/2 OD O-ring
2E † 1 3/32 x 3/4 OD O-ring
2F † 2 3-1/2 OD Back-up washer
2G † 1 Piston seal o-ring
3 26338 1 Rod end housing
4 25497 1 Piston
5 25496 1 1-14 UNS Jam nut
6 26341 4 Tie rod
7 11893* 1 1/2 x 1/4 Pipe reducer bushing
8 25494 1 Cylinder butt end
9 923* 4 1/4 x 1-3/4 Cotter pin
10 1631 2 1 x 3-5/8 Clevis pin
11 11975 1 1/2 NPT Vent plug -or-
11 23547 1 1/4 NPT Vent plug
12 26342 1 Cylinder barrel
13 ----- - Not required
14 ----- - Not required
15 4391 8 1/2 NF Hex jam nut
16 25661 1 Cylinder rod clevis
17 6698* 1 3/8 NC Hex locknut
18 23550* 1 3/8 NC x 1-1/2 Socket head cap
screw
19 26343 1 Cylinder rod
20 10475 1 Hydraulic cylinder complete (single-
acting)
21 4510* 1 1/2 Pipe plug
* Obtain Locally - Standard Hardware
† Included in Seal Kit
REF PART QTY DESCRIPTION