What to do if the Woodward Control Panel RP-3000 remote panel has an incompatible software version with the easYgen-3000 Series genset control?
If the software version displayed doesn't match the 'Expected RP-3000' software number, reset the battery voltage of the RP-3000 remote panel while connected to the CAN interface 2 of the easYgen-3000 Series genset control. Also, update the RP-3000 with the correct software version.
General| Manufacturer | Woodward |
|---|---|
| Category | Control Panel |
| Model | RP-3000 |
| Input Voltage | 24 VDC |
| Mounting | Panel Mount |
| Display | LCD |
| Communication Protocols | Modbus RTU |
| Enclosure Rating | IP65 |
| Operating Temperature | -20 to +70°C (-4 to +158°F) |
Lists easYgen-3000 genset controls compatible with the RP-3000 remote panel.
Illustrates typical setup for the RP-3000 remote panel with genset controls.
Details the components included with the RP-3000 remote panel.
Describes general limitations and differences in functionality compared to easYgen-3200/3500.
Details delays in alarm list and event history display on the RP-3000.
Covers limitations in text display and setpoint adjustments on the RP-3000.
Provides overview of the manual's content and structure.
Outlines copyright, liability limitations, and disclaimer for the manual.
Information on contacting customer service and warranty terms.
Details critical safety information, hazards, and precautions for operation.
Specifies required personnel qualifications for safe operation and maintenance.
Covers electrical, prime mover, modification, battery, and ESD safety.
Lists required personal protective equipment and tools for tasks.
Describes the RP-3000 display for status information and configuration.
Details the available hardware interfaces and terminals on the RP-3000.
Explains procedures for updating RP-3000 software and checking versions.
Troubleshooting steps for recognizing and matching software versions.
Table detailing valid software version combinations for system compatibility.
Instructions for mounting the RP-3000 unit in its plastic housing.
Procedure for installing the RP-3000 using clamp fasteners.
Procedure for installing the RP-3000 using the provided screw kit.
Details on making connections, including wire sizes and terminal allocation.
Provides a comprehensive wiring diagram for the RP-3000.
Information on connecting the power supply and required protective devices.
Details the RP-3000's relay output function and specifications.
Information on the serial interface, specifically RS-232.
Details for connecting and configuring the CAN bus interface.
Specifies maximum communication bus wiring lengths based on baud rate.
Recommendations for bus shielding to ensure reliable communication.
Common problems and solutions for CAN bus communication issues.
Guides on basic configuration, including language and display settings.
Procedure for setting the unit's display language.
Adjusts the contrast and brightness of the RP-3000 display.
Function to test all indicator lights on the RP-3000 remote panel.
Details on accessing different configuration levels via passwords.
Shows the current access code level indicated by a lock symbol.
Explains the password system for multi-level configuration access.
Guides on setting up CAN communication between RP-3000 and easYgen controllers.
Setup parameters for connecting RP-3000 to easYgen via CAN interface 2.
Configuration steps for the RP-3000 when using CAN interface 2.
Configuration steps for easYgen-3000 series via CAN interface 2.
Configuring easYgen-3000 via front panel using CAN interface 2.
Configuring easYgen-3000 via PC ToolKit using CAN interface 2.
Setup parameters for connecting RP-3000 to easYgen via CAN interface 1.
Configuration steps for RP-3000 when using CAN interface 1.
Configuration steps for easYgen-3000 series via CAN interface 1.
Configuring easYgen-3000 via front panel using CAN interface 1.
Setting Node-IDs for CAN bus communication.
Configuring Transmit PDO 2 parameters for CAN communication.
Configuring Transmit PDO 3 parameters for CAN communication.
Configuring easYgen-3000 via PC ToolKit using CAN interface 1.
Explains basic navigation principles for the RP-3000 interface.
Details specific menu screens for local RP-3000 settings.
Adjusts contrast and brightness of the RP-3000 display.
Tests all indicator lights for correct operation on the RP-3000.
Procedure for activating code levels for remote configuration access.
Accesses RP-3000 specific system management settings.
Shows software version and serial number of the RP-3000 unit.
Details the RP-3000 relay output, its self-test function, and error trips.
Introduces the RP-3000 as a remote control for easYgen genset controls.
Details the recommended connection of RP-3000 to easYgen via CAN interface 2.
Describes connecting the RP-3000 to easYgen via CAN interface 1.
Notes on using CAN interface 1 for RP-3000 connection, emphasizing low bus load.
Provides an overview of the RP-3000 interfaces and their supported protocols.
Details the CAN interfaces available on the RP-3000.
Details the serial interfaces available on the RP-3000.
Information on the RS-232 interface for ToolKit connectivity and updates.
Presents technical data and product label information.
Specifies environmental operating conditions and power supply details.
Details discrete outputs and their electrical specifications.
Provides specifications for RS-232 and CAN bus interfaces.
Information regarding the battery type and lifespan.
Describes the housing type, dimensions, and cutout requirements.
Lists EMC, CE, UL, and marine type approvals for the unit.
Covers vibration, shock, temperature, and humidity specifications.
Provides supplementary details and resources.
Lists alternative D-SUB connector housings for proper fit.
Details pin assignments for third-party CAN bus connectors.
Pin assignment details for RJ45/8P8C connectors.
Pin assignment details for IDC/header connectors.
To Next Page
