Product data for energy consumption
9
Comfort+ I RF/Stat RF – 6720886119 (2018/07)
Fig. 9 Replace batteries
8 Product data for energy consumption
The product data specified comply with the requirements of
EURegulation No. 811/2013 as a supplement to
EcodesignDirective 2017/1369/EU. The class of temperature
controller is required to calculate the central heating energy
efficiency of an integrated system, and it is therefore
incorporated into the system data sheet.
1) Classification in accordance with EU Regulation No. 811/
2013 for identification of integrated systems
2) Contribution to seasonal energy efficiency of central
heating in %
9 Simplified EU Declaration of Conformity
regarding radio equipment
Bosch Thermotechnik GmbH hereby declares, that the
Comfort+ I RF/Stat RF product described in these instructions
complies with the Directive 2014/53/EU.
The complete text of the EU Declaration of Conformity is
available on the Internet: worcester-bosch.co.uk.
10 Specifications
Table 5 Wireless technology in Comfort+ I RF/Stat RF
Table 6
11 Environmental protection/disposal
Used electrical and electronic appliances
Electrical or electronic devices that are no longer
serviceable must be collected separately and sent
for environmentally compatible recycling (in
accordance with the European Waste Electrical
and Electronic Equipment Directive).
To dispose of old electrical or electronic devices, you should
use the return and collection systems put in place in the country
concerned.
Batteries must not be disposed together with your household
waste. Used batteries must be disposed of in local collection
systems.
Function of Comfort+ I RF/Stat RF
& key
Class
1)
[%]
1),2)
Room temperature-dependent,
modulating
V 3.0
0 010 020 506-001
+
+
1
Band width frequency 868.7 ... 869.2 MHz
Maximum transmitting capacity <10 mW
Transmission frequency 868 MHz
Transmission protocol (wireless) X3D-C
Receiver category 2
Dimensions (W × H × D) 82 × 82 × 23 mm
Power supply 2 × AAA
Battery service life in normal use 2 years
Rated current 12 mA
BUS interface EMS 2
Control range 5 ... 30 °C
Permissible ambient temperature 0 ... 60 °C
Protection class III
IP rating IP20
Temperature of ball test 75 °C
Degree of pollution 2