Worcester DT10RF Instruction Manual

Setting individual weekdays:
NOTE: If you do not require individual weekday
times, then press set? until SET SAT-SUN
is displayed and continue on the next page.
If you do not wish to change the setting for the day
displayed, then press set? until the first day you
want to change is displayed.
1. Press OK to select weekday.
2. Press OK to select first ON time.
NOTE: Speed up the display by holding down
the + or - buttons.
3. Press + or - to change the ON time.
4. Press set? to set the ON time and select the
OFF time.
5. Press + or - to change the OFF time.
6. Press set? to set the OFF time and select the
next ON time.
Repeat operations 3 to 6 to set the second and third
ON/OFF times.
NOTE: After pressing set? for the third OFF time,
SET and the next weekday are displayed
after completing the steps above for FRI the
display shows SET SAT-SUN.
see next page....
DT10RF RECEIVER
PROGRAMMABLE SETTINGS
DT10RF PROGRAMMER
INSTRUCTION MANUAL
8 716 115 493a (02.2009)
OPERATING & INSTALLATION
INSTRUCTIONS
17
8_716_115_493a 9/2/09 09:46 Page 21

Worcester DT10RF Specifications

General

Compatibility	Worcester Bosch Boilers
Display	LCD
Programming	7-day programmable
Mounting	Wall-mounted
Wireless	Yes
RF Frequency	868 MHz
Accuracy	±0.5°C
Type	Digital
Power Source	Battery
Communication	Radio Frequency