Changing the Maximum Temperature Setting
1. To adjust the “Maximum” temperature enter the
User menu by pressing and holding the Set
button for more than 5 but less than 10 seconds.
2. Rotate the dial clockwise until ‘HI’ is showing.
3. Then press the Set button, the current setting is
shown.
4. Rotate the dial clockwise to increase the maxi-
mum temperature setting (max. 30°C) as shown.
Rotate anti-clockwise to reduce the maximum
temperature setting.
5. Press the Set button to confirm, the display will
show HI.
NOTE: When adjusting the settings within the
menu, if the maximum or minimum possible setting
are reached, the display will flash to indicate you
cannot adjust the product further, e.g. you cannot
set the temperature higher than the maximum tem-
perature setting.
To return to normal operation, either press the Set
button for more than 5 seconds or wait for 1
minute and it will return automatically.
DIGISTAT ROOM THERMOSTAT
ADVANCED SETTING
To Next Page
Loading...
Need help?
General