To Next PageTo Next Page
Need help?Do you have a question about the Worcester OIL HEATSLAVE 26/32 and is the answer not in the manual?
General| Fuel Type | Oil |
|---|---|
| Efficiency | 90% |
| Output | 26-32kW |
| Efficiency Percentage | 90% |
| Max Working Pressure | 3 bar |
| Output Rating (kW) | 26-32 kW |
| Model | Worcester Bosch Oil Heatslave 26/32 |
Explains Central Heating, Domestic Hot Water, and combined modes.
Table detailing power supply, IP rating, connections, weight, and dimensions.
Positions and minimum distances for flue terminals to avoid nuisance.
Details on single pipe, double pipe, and suction lift systems.
Details on flow rates, restrictors, and pressure requirements.
Compliance with IEE Wiring Regulations and isolation requirements.
Details on mains supply voltage, fuse ratings, cable type, and isolation.
Flow chart for combined heating and hot water operation.
Flow chart for domestic hot water operation only.
Steps for installing and filling the heating system.
Procedures for installing the oil supply line for different systems.
Steps for commissioning the burner, including bleeding and adjustments.
Detailed steps for cleaning the burner components.
Safety measures before replacing components.
Procedures for replacing the burner and pump.
Steps for replacing Central Heating, DHW, High Limit, and Manual Reset thermostats.
Diagnosing and resolving ignition failures.
Diagnosing why the burner fails to start.
Diagnosing and rectifying high smoke numbers.
Understanding and resolving lockout indications.
