To Next PageTo Next Page
Need help?Do you have a question about the Worcester Greenstar Heatslave II External 12/18 and is the answer not in the manual?
General| Model | Greenstar Heatslave II External 12/18 |
|---|---|
| Category | Boiler |
| Output Rating | 12-18 kW |
| Weight | 110 kg |
| Installation | External |
| Fuel Type | Oil |
| Type | Oil |
| Storage Capacity | Not applicable |
| Warranty | 5 years |
Safety measures to be taken in case of oil fumes or leaks.
Requirement for installation by a qualified and competent person.
Compliance requirements with relevant British Standards.
Procedures for flushing and cleaning the central heating system.
Requirements for the electrical power supply connection.
Specifications and requirements for the mains water connection.
Installation details for a single pipe gravity feed oil system.
Installation details for a double pipe sub-gravity feed oil system.
Installation details for suction lift oil feed with de-aerator.
Guidelines and requirements for oil supply pipework installation.
Procedure for filling primary sealed heating systems.
Installation requirements for the domestic hot water system.
Detailed guidelines for correct flue terminal placement.
Steps for safely unpacking and handling the boiler.
Instructions for connecting the water pipework.
Instructions for connecting the oil supply pipework.
Instructions for connecting the condensate drain pipe.
Instructions for connecting the pressure relief pipe.
Steps for setting up and checking the oil burner.
Initial checks to perform on the appliance before commissioning.
Instructions for handover to the end-user and final checks.
General procedures for inspecting and servicing the boiler.
Tasks to be performed during annual routine servicing.
Explanation and causes of blocking error fault codes.
Explanation and causes of locking error fault codes.
Detailed troubleshooting logic for Riello digital control boxes.
