EasyManua.ls Logo

Worcester GREENSTAR HE combi Series User Manual

Worcester GREENSTAR HE combi Series
176 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation and Servicing Instructions
GREENSTAR HE combi
Wall mounted condensing boiler for central heating and mains
fed domestic hot water
6 720 610 577-00.10
ZWB 7-25 HE combi
GC-Number: 47 311 73
ZWB 7-30 HE combi
GC-Number: 47 311 74
6 720 610 576 GB (03.02) OSW

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Worcester GREENSTAR HE combi Series and is the answer not in the manual?

Worcester GREENSTAR HE combi Series Specifications

General IconGeneral
BrandWorcester
ModelGREENSTAR HE combi Series
CategoryBoiler
LanguageEnglish

Summary

Safety Precautions

If You Smell Gas

Safety advice for responding to the smell of gas.

1 Details of the Appliance

1.9 Technical Data ZWB 7/11-25

Detailed technical specifications for the ZWB 7/11-25 model.

1.10 Technical Data ZWB 7/11-30

Detailed technical specifications for the ZWB 7/11-30 model.

2 Installation Regulations

Gas Safety (Installation & Use) Regulations 1998

Legal requirements for gas appliance installation.

3 Installation

3.1 Important Remarks

Key considerations before starting appliance installation.

3.4 Siting the Appliance

Guidance on choosing a suitable location for the appliance.

Condensate Termination and Route

Procedures for routing and terminating the appliance's condensate pipe.

3.7 Fitting the Appliance

Instructions for physically fitting the boiler to the wall.

3.8 Checking the Connections

Procedures for verifying all appliance connections are secure.

3.9 Flue Systems

Information on approved flue systems and installation requirements.

3.9.1 Siting the Flue Terminal

Guidelines for positioning the flue terminal correctly.

3.9.2 Installation of the Flue

Detailed instructions for installing the flue system.

3.9.3 Flue Duct Preparation and Assembly

Steps for preparing and assembling the flue duct components.

4 Electrical Connections

4.1 Connecting the Appliance

Instructions for making the main electrical connection to the appliance.

5 Commissioning

5.1 Commissioning Procedures

Initial steps and checks required after installation.

5.5 Setting Domestic Hot Water Temperature and Flow Rate

Adjusting domestic hot water temperature and flow rate settings.

5.9 Fault Condition

Procedure for responding to and clearing appliance faults.

6 Individual Settings

6.1 Mechanical Settings

Adjustments to physical components like the expansion vessel.

6.1.2 Central Heating Flow Temperature

How to adjust the central heating flow temperature.

6.2 Settings on the Bosch Heatronic

Configuring settings via the Bosch Heatronic control system.

7 Converting the Appliance to Different Gas Types

7.1 Setting the Gas/Air Ratio

Adjusting the gas/air ratio for different gas types.

8 Maintenance

8.1 Pre-Service Check List

A checklist for pre-service inspection of the appliance.

8.3 Replacement of Parts

General guidance on replacing appliance components.

9 Appendix

9.1 Fault Codes

Table listing appliance fault codes and their remedies.

Related product manuals