6 720 610 597 GB (03.02)
Text Display
29
B Confirm the setting by pressing the button.
B Use the or button to set the day of the
week.
B Press the button to confirm the setting. The
cursor then returns to the top line.
-or-
B Press the button to confirm the setting and
return to the previous menu (Fig. 37 page 28).
-or-
B Do not press any other buttons for 15 minutes.
6.2.1 Deleting a setting
Either overwrite the setting or press the button to
delete it.
B Find the setting to be deleted.
B Press and release the button.
The display shows --:--
6.2.2 Resetting all parameters to their original
settings.
B Press and hold the button for more than 15 sec-
onds.
After about 5 seconds, the following message
appears on the display:
ATTENTION
Delete all parameters
in x seconds
Once the reset has been completed, the following
message is displayed:
Please wait... Initialising
6.3 Menu structure
i
The hours of service can not be reset to 0.
C
C
C
Submenu
Main
menu 1. 2. 3.
Parameters to
change/select
Page
Time/
day/holi-
days
Time/day - - - Hours
- Minutes
- Day of week
30
Holidays - - Days holiday 30
Heating Heating
program
- - - Day
- 1st operating mode
- 1st switching point
...
- 6th switching point
30
Set econ-
omy
temp.
(if TR2 is
con-
nected)
- - 5...30˚C 30
Manual
(if TR2 is
not con-
nected)
- - - Automatic
- Constant on
(comfort)
- Constant off
(economy)
31
Hot
water
Hot
water
program
- - - Day
- 1st operating mode
- 1st switching point
...
- 6th switching point
31
Hot
water
immedi-
ately
- - Off/On 31
Info - - - - 31
Settings Heating - - Optimum Start Off/
On
32
Service Display
service
param.
- - 32
Further
options
Lan-
guage
-English/
-Français/
-Deutsch
32
-Time correction
-LCD contrast
32
32
Operat-
ing
times
- 32
Fault
history
- 32