6 720 610 597 GB (03.02)
Text Display
31
6.5.3 Manual operating mode (if TR2 is not con-
nected)
For selecting an operating mode that is different from
the one set in the heating programme (Automatic
mode).
• You can choose between Automatic, Constant on
(comfort) and Constant off (economy).
• The manually selected operating mode starts imme-
diately.
• Constant off (economy) and Constant on (comfort)
are automatically reset at 00.00 (midnight).
• To cancel the manually selected operating mode:
– select the relevant menu and then press the
button,
– or select a different operating mode,
– or set Holiday.
B From the main menu select Heating and then from
the first submenu Manual select required mode.
6.6 Hot water
General description
• The basic settings provide a straightforward timer
programme: enabled from 5:00 am, disabled from
10:00 pm. The ECO button must not be lit (Comfort
mode).
6.6.1 Hot water programme
• Up to six switching points per day can be set.
• There are two operating modes: Blocked and
Released.
B From the main menu, select Hot water and then
from the first submenu, select Hot water program.
B Set the days of the week, Blocked/Released (oper-
ating mode) in the same way as for the switching
points and modes for heating as described on
page 30.
6.6.2 Hot water immediately
• Hot water immediately ON:
– Comfort mode is active for 2 hours.
• Comfort mode is active for 2 hours: normal auto-
matic program (Hot water mode according to timer
programme entered).
B From the main menu, select Hot water and then
from the first submenu, select Hot water immedi-
ately.
B Press or to switch Hot water immedi-
ately on or off.
6.7 i Info
B Select Info from the main menu.
You can view the following information:
C
Display text Description
Room tempera-
ture
(if TR 2 connected)
Current temperature in the
room where TR 2 is installed
Required room
temperature
(if TR 2 connected)
Required temperature in
room where TR 2 is installed
Operating mode
(if TR 2 connected)
E. g. Heating, Economy in
Automatic mode
or
Economy, Heating, Frost
protection in manual mode
Max. flow temp. Maximum CH flow tempera-
ture set on the temperature
control for CH flow
Actual flow temp. Actual CH flow temperature
Required flow
temp.
Required CH flow tempera-
ture
Max HW temp. Maximum permissible hot
water outflow temperature
Required HW
temp.
Required hot water temper-
ature
Actual HW temp. Actual hot water outflow
temperature
Boiler operat.
mode
winter/ summer
Indicates which mode the
CH flow temperature control
is set to
Burner on/off Indicates whether the
burner is alight or not
Pump on/off Indicates whether the inte-
gral pump is switched on or
off
To Next Page
Loading...
Need help?
General