Worcester Greenstar Heatslave II External 12/18

SAFETY & REGULATIONS
IMPORTANT INFORMATION AND SYMBOLS 2
SAFETY PRECAUTIONS AND INSTALLATION REGULATIONS 4
APPLIANCE INFORMATION
GENERAL INFORMATION 5
TECHNICAL DATA 6
LAYOUT & COMPONENTS 7
PRE-INSTALLATION
CLEANING PRIMARY SYSTEMS 8
MAINS SUPPLY 9
OIL SUPPLY 10
WATER SYSTEMS & PIPEWORK 12
CONDENSATE PIPEWORK 14
CONDENSATE PIPEWORK TO SOAK AWAY 15
PRESSURE RELIEF PIPEWORK 16
BOILER LOCATION & CLEARANCES 17
FLUE TERMINAL POSITIONS 18
PLUME MANAGEMENT 20
CABINET MOUNTED BALANCED HORIZONTAL FLUE OPTIONS 21
INSTALLATION
UNPACKING THE BOILER 22
PIPEWORK POSITIONS / FLUE OPENING 23
BOILER INSTALLATION 24
FLUE INSTALLATION 25
COMBUSTION CHAMBER 26
PIPEWORK CONNECTIONS 27
OIL BURNER AND PUMP 28
REFITTING COMPONENTS 29
ELECTRICS 30
WEATHER COMPENSATION 34
COMMISSIONING
PRE-COMMISSIONING CHECKS - APPLIANCE 35
FILLING THE SYSTEM 36
STARTING THE APPLIANCE 37
WATER TREATMENT 43
FINISHING COMMISSIONING - APPLIANCE 44
SERVICING & SPARES
INSPECTION AND SERVICE 45
SHORT PARTS LIST 12/18 50
SHORT PARTS LIST 18/25 51
SHORT PARTS LIST 25/32 52
FAULT FINDING & DIAGNOSIS
MENUS 53
RESET & ERRORS 55
FUNCTION CHARTS 57
SOLAR COMPATABILITY 60
BURNER DIAGNOSTICS MODE 61
FAULT FINDING LOGIC FOR RIELLO DIGITAL CONTROL BOX 62
COMMISSIONING CHECKLIST 64
SERVICE INTERVAL RECORD 65
CONTENTS
CONTENTS
INSTALLATION & SERVICING INSTRUCTIONS FOR GREENSTAR HEATSLAVE II EXTERNAL 12/18-18/25-25/32
6 720 805 210-01
3
SAFETY &
REGULATIONS
APPLIANCE
INFORMATION
PRE -
INSTALLATION
INSTALLATIONCOMMISSIONING
SERVICING
& SPARES
FAULT FINDING
& DIAGNOSIS