8. Using the device
In Art-NET mode, the device can be controlled by any software capable of generate Art
-NET, i.e.
Chamsys MagicQ or using a DMX to ArtNet interface as LM 3E.
LM 3R - 5 -
8. 1 Using LM 3E as ArtNet generator
LM 3E is a DMX to ArtNet interface able to convert DMX frame and send this information through
LAN network. This information can be received by one LM 3R configured in the same Subnet.
Depending on the installation, it is possible to configure several LM 3E with different universes in the
same SubNet and setting one LM 3R on each universe for its reception.
In all cases, use the SubNet/Universe switches (7) to set the device according to the right connection
and the chosen universe to be controlled.
User Manual/Manual de Uso
EN
To Next Page
Loading...
