18 Work Sharp Knife & Tool Sharpener
Flat SideBeveled Side
Step 1
Step 2
Install purple belt; slide outdoor knife
guide (includes serrated guide) over the belt.
The serrated guide is located below the 25° slot.
NOTE: Proper serrated-blade position: only place
serrated blades on downhill / right side of belt;
otherwise, you risk cutting the belt.
Repeat 2 to 3 strokes.
NOTE: Serrated knives have
a fl at side and a beveled side
on the blade; sharpen ONLY
the fl at side with your Work
Sharp Knife & Tool Sharpener.
Belt: 6000 PURPLE
Sharpening
Serrated Knives
6
Place fl at side of blade against the
serrated knife guide at the bolster /
handle. Squeeze power switch; pull knife
steadily across belt from bolster to tip of
blade; 8-in. knife should take 2 seconds.
To Next Page
Loading...
