24 Work Sharp Knife & Tool Sharpener
Step 1
NOTE: These tools usually have only one sharp, beveled blade.
Re-sharpen ONLY the beveled blade. These tools do not require
sharpening to a precise angle; just let the belt conform to the edge of the
tool. Remember, the tool is not intended for heavy-duty use; do not
exceed 20 minutes use in 1 hour.
Remove guide, install red belt; move
sharpening cassette to grinding position B.
Clamp pruners in a bench vise.
Step 2
Belt: P220 RED
Sharpening Tools
12
Pruners, Shears, & Other Bypass
Cutting Tools
NOTE: Some tools require the
blade to be inserted through
the grinding frame opening
(as shown) to allow belt
access to the cutting edge.
TIP: Tools that are not damaged or chipped may only require a honing
with 6000 grit purple belt.
Repeat 2 to 4 strokes or until you are satisfi ed
with the sharpness.
To Next Page
Loading...
