STOP
Abrasive Belt
Follow the curve of the blade so
the edge remains perpendicular
to the belt. Turn the power off as
you come to the point.
Use this technique for these blade
types:
Pull straight through the guide
and stop ON the middle of the
belt. Do not lift the blade handle.
Turn power off as you come to the
point.
Use this technique for these blade
types:
d) Problem: My knives are cutting into my sharpening guides.
Solution 1: Use lighter pressure. Using only the weight of the
blade while in the sharpening guide provides best results.
e) Problem: The sharpening guide is scratching my knife.
Solution 1: Use an old paint brush to keep guide surfaces clean.
Solution 2: Apply masking tape to blade faces when sharpening.
Best Techniques:
Maintain factory blade profile / shape:
To Next Page
Loading...
