Workshop WS0501WM User Manual

10
ACCESSORIES
14 Foot
Tug-A-Long Hose
Super Flex
Hose
Storage
Accessory Bin
Containing
2 Extension
Wands and
4 Cleaning Tools
7 Expandable
Locking Hose
Storage
Accessory Bin
Containing 2
Extension Wands
and 4 Cleaning
Tools
14 Locking Hose
Hose, Extension Wand, and
Cleaning Tool Storage
1. Slide the extension wands at the far
sides of the Accessory Storage Bin
located on the right side of the Wall
Mounted Vac. Slide the claw nozzle
and the flexible crevice tool next to the
extension wands in the storage bin.
Position the dusting brush vertical and
slide it on the top of the storage bin’s
accessory slot. Last, place the floor
brush flush against the accessory slot
storage area and slide down into
storage position. The storage bin
accommodates both extension wands
and the four cleaning tools.
Filled Storage Bin
Empty Storage Bin
Storage Bin
Accessory
Storage Pins
Flexible
Crevice Tool
Extension
Wands (2)
Claw
Nozzle
Floor
Brush
Soft
Dusting
Brush
Storage
Bin
2. Insert the 7 foot Expandable Locking
Hose ends into the hooks on the left
side of the Wall Mounted Vac, as
shown below.
3. Form a double loop with the 14 foot
Locking Hose and hang on hose
storage hook at the top of the rack.
SP6931-2 Workshop 5 Gallon.qxp_SP6931 8/22/16 2:03 PM Page 10

Workshop WS0501WM Specifications

General

Brand	Workshop
Model	WS0501WM
Category	Vacuum Cleaner
Language	English