WORKZONE TITANIUM PREMIUM HC520 - Additional Safety Instructions; Safety for Specific Tasks

15
Safety informaon
ADDITIONAL SAFETY INSTRUCTIONS
Safety instrucons for working with compressed air and blasng guns
• The compressor pump and lines can become very hot during operaon. Touching
these parts will burn you.
• The air which is sucked in by the compressor must be kept free of impuries that
could cause res or explosions in the compressor pump.
• When releasing the hose coupling, hold the hose coupling piece with your hand.
This way, you can protect yourself against injury from the rebounding hose.
• Wear safety goggles when working with the blow-out pistol. Foreign bodies or
blown o parts can easily cause injuries.
• Do not blow at people with the blow-out pistol and do not clean clothes while
being worn. Risk of injury!
Safety informaon for paint spraying
• Do not process any paints or solvents with a ash point below 55° C.
There is a risk of explosion!
• Do not heat up paints or solvents. There is a risk of explosion!
• If hazardous liquids are processed, wear protecve lter units (face guards). Also,
adhere to the safety informaon provided by the manufacturers of such liquids.
• The details and designaons of the Ordinance on Hazardous Substances, which are
displayed on the outer packaging of the processed material, must be observed.
• Addional protecve measures are to be undertaken if necessary, parcularly the
wearing of suitable clothing and masks.
• Do not smoke during the spraying process and/or in the work area.
There is a risk of explosion! Paint vapors are easily combusble.
• Never set up or operate the equipment in the vicinity of a re place, open lights or
sparking machines.
• Do not store or eat food and drink in the work area. Paint vapors are harmful to
your health.
• The work area must exceed 30 m
3
and sucient venlaon must be ensured
during spraying and drying. Do not spray against the wind. Always adhere to the
regulaons of the local police authority when spraying combusble or hazardous
materials.
• Do not process media such as white spirit, butyl alcohol and methylene chloride
with the PVC pressure hose. These media will destroy the pressure hose.