J
jessica90Aug 4, 2025
What to do if WORKZONE TITANIUM Air Compressor starts but there is no pressure?
- KkimsandersAug 4, 2025
If your WORKZONE TITANIUM Air Compressor starts but isn't building pressure, the non-return valve may be leaking. It is suggested to have a service center replace the non-return valve. Damaged seals could also be the cause; in this case, you should check the seals and have any damaged seals replaced by a service center. Another potential issue is a leaking drain plug for condensation water; tighten the screw by hand and check the seal, replacing it if necessary.