13
Safety informaon
4 Keep children away
– Do not allow other persons to touch the equipment or cable, keep them away
from your work area.
5 Securely store unused electric tools
– Unused electric tools should be stored in a dry, elevated or closed locaon
out of the reach of children.
6 Do not overload your electric tool
– They work beer and more safely in the specied output range.
7 Wear suitable clothing
– Do not wear wide clothing or jewellery, which can become entangled in
moving parts.
– Rubber gloves and non-slip shoes are recommended when working outdoors.
– Tie long hair back in a hair net.
8 Do not use the cable for purposes for which it is not intended
– Do not use the cable to pull the plug out of the outlet. Protect the cable from
heat, oil and sharp edges.
9 Take care of your tools
– Keep your compressor clean in order to work well and safely.
– Follow the maintenance instrucons.
– Check the connecon cable of the electric tool regularly and have it replaced
by a recognised specialist when damaged.
– Check extension cables regularly and replace them when damaged.
10 Pull the plug out of the outlet
– During non-use of the electric tool or prior to maintenance and when
replacing tools such as saw blades, bits, milling heads.
11 Avoid inadvertent starng
– Make sure that the switch is switched o when plugging the plug into an
outlet.
12 Use extension cables for outdoors
– Only use approved and appropriately idened extension cables for use
outdoors.
– Only use cable reels in the unrolled state.
13 Remain aenve
– Pay aenon to what you are doing. Remain sensible when working.
Do not use the electric tool when you are distracted.
14 Check the electric tool for potenal damage
– Protecve devices and other parts must be carefully inspected to ensure that
they are fault-free and funcon as intended prior to connued use of the
electric tool.
– Check whether the moving parts funcon faultlessly and do not jam or
whether parts are damaged. All parts must be correctly mounted and all
To Next Page
Loading...