i) Before the using saw blades, make sure that all protective de-
vices are properly fastened.
j) Before use, make sure that the saw blade meets the technical
requirements of this electrical power tool and is securely fas-
tened.
k) Only use the included saw blade for cutting wood; never for
working with metal.
WARNING!
This electric tool generates an electromagnetic field during
operation. This field can impair active or passive medical im-
plants under certain conditions. In order to prevent the risk of
serious or deadly injuries, persons with medical implants should
consult with their physician and the manufacturer of the medical
implant prior to operating the electric tool.
WARNING!
The vibration emission value can vary from the specified val-
ue during the actual use of the electric tool, depending on the
type and the manner in which the electric tool is used. Keep
stress from vibrations as low as possible. Some examples of means
for reducing the vibration stress are wearing gloves while using
the tool and limiting work time. In the process all parts of the op-
erating cycle must be taken into account (such as times in which
the electric tool is switched off or time in which it is switched on,
but is not running under a load).
− The specified vibration emission value has been measured ac-
cording to a standardised testing procedure and can be used
for comparison of one electric tool with another. The specified
vibration emission value can also be used for an initial assess-
ment of the load.
To Next Page
Loading...
