Workzone LM128-Elite - Troubleshooting Common Issues

The Rugged Phone
04
Optional
Restore factory settings
This feature allows you to reset the phone to the same settings as those configured at the factory.
You will need to input password to restore factory settings. The initial password is “1122”.
Troubleshooting
If you experience a problem when using the phone, please try the following before contacting the manufacturer.
Problems
Reasons and Solutions
Can’t switch on
Press and hold end key until image appears on the display.
Check the battery contacts. Remove and insert battery and switch
your phone on again.
Check the battery charge level.
Can’t connect to
network
Move into an area of better coverage.
Contact your service provider if your SIM card is invalid.