24v Lithium-ion Cordless Drill with Hammer Action
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. 51887 • 06/2016 • 51887
(toll free)
4
Pack contents / parts
Congratulations on the purchase of your Workzone® Titanium 24V
Lithium-Ion Cordless Drill. When you open your packaging, first remove
all items and check there are no parts damaged or missing. If you find
anything wrong, do not operate the product until the parts have been
replaced or the fault has been rectified. Failure to do so could result in
serious personal injury.
NOTE: First time users or inexperienced operators pay particular attention
to the operation of the Cordless Hammer Drill, including details of starting
and stopping and correct use of the Cordless Hammer Drill on pages 16 to
20, as well as the maintenance instructions on pages 21.
Intended use of the 24V Lithium-Ion Cordless Hammer Drill
NOTE: This product is for private domestic DIY use only.
It is not suitable for commercial or trade use.
This drill/driver is mainly used for drill/driving in wood or metal sheet,
hammer drilling into non aggregate concrete, and screwdriving. Use the
tool and accessories only for intended applications.
Contents of carton
1 x 24V Lithium-Ion Hammer
Drill/driver
1 x 24V Lithium-Ion Battery
1 x 1 Hour Charger Base
1 x Plug Pack Charger
1 x Belt Clip + easy assembly screw
(not fitted)
1 x Carry Strap (fitted)
1 x Instruction manual
1 x Warranty card and certificate
1 x Quick Start Guide
2
To Next Page
Loading...
Need help?
General
