6.2 CONTROL EDIT
The knobs and sliders can be set to transmit special value of the Control .
*SET CONTROL VALUE: Use [ < ] or [ > ] button to select Control VALUE field,The LCD
display ‘CTLdata2, While in Control VALUE field, use [VALUE] dial to select desired
Controller VALUE.
7. TRANSPORT CONTROL
There are 6 buttons used for transport control, [|<<],[<<],[>>],[O],[stop],[play].It is common
to set the 6 buttons as Sequencer remote control buttons, it needs to be working with
sequencer software.
To Next Page
Loading...
