Worx Landroid L Installation Guide

7
EN
If there are roots emerging from the ground, this area should be
avoided in order not to damage the roots.
Trees
In the case of large bumps or dips, please consider if the blades
could touch the ground; if this is the case, either make the
inclines smoother or exclude those areas from your Landroid
®
L’s
operation.
Depressions and bumps
Your Landroid
®
L has the ability to safely climb slopes up to 35%
(20°), so just avoid anything steeper than this.
Slopes
35% (20°)
The Upper Boundary Wire should NOT be placed on slopes
steeper than 35% (20°). The Upper Boundary Wire should have
a distance of at least 35cm between any obstacles. The Lower
Boundary Wire should NOT be placed on slopes steeper than
25% (15°). The Lower
Boundary Wire should have a distance of at least 45cm between
any obstacles when it is positioned on a slope that is 25%.
Placement of Boundary Wire on slopes
Upper boundary wire
Lower boundary wire
Lower boundary
Wire

Worx Landroid L Specifications

General

Cutting Width	20 cm
Battery Voltage	20 V
Maximum Slope	35 %
Blade Type	3 pivoting blades
Rain Sensor	Yes
Maximum Cutting Height	60 mm
Battery Type	Li-Ion
Battery Capacity	2.0 Ah
Area Capacity	500 m²
Boundary Wire	Yes
Connectivity	Wi-Fi
Smartphone App	Yes
Minimum Cutting Height	30 mm
Operating Time	60 minutes