Marking out Landroid
®
L’s
territory within your garden
Your Landroid
®
L needs to know where to mow. This is why you have to mark its working area with a boundary
wire that will form an invisible fence. This wire will also guide your Landroid
®
L to its charging base.
If your neighbor also uses a Landroid
®
L, then you must keep a space of at least 2metres between your Boundary
Wire and your neighbors.
Please be aware that your Landroid
®
L will not be able to receive
a signal from the Boundary Wire beyond the distance of 25m.
The charging base should be placed along a straight line—allow
2 meters at both the front and the back. If possible, place the
charging base in the shade—batteries are better recharged in a
cool place.
First of all, locate the best spot for the charging base, taking
into account where your nearest outdoor electricity socket is.
The charging base has a 15m power cord.
NOTE: Make sure the transformer and the electrical socket
are kept in a dry area at all times.
An island is an area that sits inside your lawn where you don't
want Landroid
®
L to go. The boundary wire starts from the
mowing boundary, goes straight to the island, around it and
back to the boundary as shown by the arrows on the picture.
Make sure it is on a flat area, clear of any obstacles.
To Next Page
Loading...
Need help?
General
