Worx Landroid L2000 User Manual

10
EN
Place the charging base
Find a flat surface for the charging base, the place should be dry
and away from direct sun light. And the adapter can be mounted
on the wall.
Landroid
®
’s charging base can be placed against the wall or
fence, with the charging components facing your lawn. If
possible, place the charging base in the shade, and it is better
to charge the battery in a cool place. Make sure the adapter and
electrical outlet are always kept in a dry place.
You can now permanently fix the charging base to the ground by
tightening the supplied base fixing nails with the supplied hex
key.
1
Installation
The charging station must be positioned on relatively level
ground. It must not be positioned on an inclined surface or
anywhere that makes its plate bend.

Worx Landroid L2000 Specifications

General

Type	Robotic lawn mower
Grass catcher	-
Product color	Black
Number of blades	4
Maximum lawn area	- m²
Edge cutting function	Yes
Recommended lawn area	2000 m²
Maximum cutting height	60 mm
Minimum cutting height	20 mm
Grass collecting volume	- L
Suitable for slope up to	20 °
Power source	Battery
Charging time	2 h
AC input voltage	28 V
Battery capacity	2.9 Ah

Weight and Dimensions

Weight	- g