Why does the green light on the charging pile turn on before charging is complete on my Worx LANDROID WR210 Lawn Mower?
The green light on the charging pile may turn on before charging is complete on your Worx Lawn Mower if the charging base is overheating or overcooling. Place the charging base in a shady area or wait until it reaches normal temperature.
What to do if my Worx LANDROID WR210 Lawn Mower is not charging?
If your Worx Lawn Mower is not charging, check that the power cord is properly connected to the charger and the charger to a suitable power supply. Also, ensure both charging strips on the mower touch the center of the charging contacts on the charging pile.
What to do if my Worx LANDROID WR210 Landroid Vision is starting to have shorter run-times between charges?
Shorter run-times between charges for your Worx Landroid Vision can be caused by: 1. Clogging in the blade disc – take off the blade disc and clean it, especially if the grass is high or thick. 2. Unbalanced blade disc – check the blade disc and blades, remove debris, and replace blades if needed. 3. Exhausted or old battery – replace the battery. 4. Working time is up - reset the working time.
What to do if my Worx LANDROID WR210 Landroid Vision cannot correctly dock with the charging pile?
If your Worx Landroid Vision cannot correctly dock with the charging pile, try the following: * Restart Landroid Vision due to potential environmental influences. * Clean the contact pins on the charging pile and the charging strip on Landroid Vision with a cloth due to poor connection caused by debris. * Ensure the QR code is clear and unobstructed.
What to do if my Worx Lawn Mower Landroid Vision shuts off when docking in the charging pile?
If your Worx Landroid Vision shuts off when docking, it may be due to: * Over temperature protection – place the charging base in a shady area or wait for cooler temperatures. * Poor connection – check the LED light on the charging pile and the connection between the contact pins on the charging pile and the charging strip.
Why is my Worx LANDROID WR210 Lawn Mower Landroid Vision not operating at the correct time?
If your Worx Landroid Vision is not operating at the correct time, it may be because: * The clock is not set to the correct time – set the clock to the correct time. * The programmed cutting times are incorrect – change the time settings. * The percentage of weekly operating time set through the APP has changed – set the correct percentage through the APP.
Why the LED light on the charging pile does not turn on for my Worx LANDROID WR210 Lawn Mower?
If the LED light on the charging pile does not turn on for your Worx Lawn Mower, check the charging base is properly connected to the charger, and the charger is connected to a suitable power supply, because there is no power.
Why does my Worx LANDROID WR210 Lawn Mower Landroid Vision beeps when I am adjusting 'month / hour / minute'?
It is normal. Anticlockwise to adjust your Worx Lawn Mower Landroid Vision.
Why does my Worx LANDROID WR210 Lawn Mower Landroid Vision wheels skid or repeatedly slip?
If your Worx Landroid Vision wheels skid or slip, it could be due to: * Obstacles lodged underneath – remove objects from the underside of Landroid Vision. * A lawn that is too wet – exclude wet areas using a magnetic strip or create a non-grass pathway until the lawn dries.
Why is my Worx LANDROID WR210 grass being cut unevenly?
Uneven grass cutting by your Worx Lawn Mower may occur due to several reasons: * The mower isn't working enough hours daily – try adding more hours to the mowing schedule. * The mowing area is too large – decrease the mowing area size or increase working time. * The blades are dull – change all blades and screws to balance the blade disc. * The cutting height is too low – raise the cutting height gradually. * Grass is wrapped around the blade disc – check and remove any obstructions. * There's a buildup of grass in the blade disc or motor frame – ensure the blade disc rotates freely, removing debris if needed. * Recognition error - remove the obstacles, such as leaves.
Read and understand instructions, be familiar with controls, and know proper appliance use.
Ensure correct installation of the automatic perimeter delineation system using the camera.
Covers general operation guidelines, including safety devices and handling.
Details on switching off the mower for maintenance and storage procedures.
Important safety precautions regarding battery handling, charging, and disposal.
Explains the Al camera technology and operational features of the Landroid Vision.
Explains PIN code protection and auto-lock function for unauthorized access.
Instructions on how to start the Landroid Vision mower and update its software.
Details on configuring advanced settings via the built-in interface or the Landroid Vision app.
Instructions on blade maintenance, checking for damage, and replacement.
Lists common error messages, their causes, and suggested solutions.
A guide to diagnose and resolve common issues encountered with the Landroid Vision.
General| Cutting Width | 22 cm |
|---|---|
| Battery Voltage | 20 V |
| Battery Capacity | 2.0 Ah |
| Max Lawn Size | 1000 m² |
| Slope Capability | 35% |
| Smart Navigation | Yes |
| Rain Sensor | Yes |
| Slope Handling | 35% |
| Noise Level | 60 dB |
| Operating Time | 60 minutes |
| Anti-Theft System | PIN code |
To Next Page