Why is my Worx Landroid WR155E Lawn Mower not operating at the correct time?
If your Worx Lawn Mower isn't operating at the correct time, it could be due to a few reasons. First, ensure that the clock is set to the correct time. If the clock is correct, check the programmed cutting times and adjust them to the correct values. Also, verify that the Landroid® is not manually docked in the charging base.
Why is my Worx Landroid WR155E Lawn Mower cutting grass unevenly?
Uneven grass cutting with your Worx Lawn Mower can occur for several reasons: * The mower isn't running long enough each day. * The mowing area is too large for the mower's capacity. * The blades are dull and need replacing. * The cutting height is set too low for the grass length. * Grass or other objects are wrapped around the blade disc. * There's a buildup of grass in the blade disc or motor frame box.
How to fix the LED light on the Worx Landroid WR155E charging base when it does not turn on?
If the LED light on the charging base of your Worx Lawn Mower isn't turning on, the cause may be that there is no power. Check that the charging base is properly connected to the power adapter and that the power adapter is connected to a suitable power supply.
Why Worx Landroid WR155E Lawn Mower run-times are getting shorter?
Shorter run times between charges for your Worx Lawn Mower can be caused by something clogged in the blade disc, the Landroid® shaking heavily, or the battery being exhausted or old.
What does it mean when the red light turns on the Worx Landroid WR155E Lawn Mower charging base?
The red light on the charging base of your Worx Lawn Mower indicates that the boundary wire isn’t connected or is broken.
Why is the charging time for my Worx Lawn Mower so long?
If the charging time for your Worx Lawn Mower is much longer than expected, it might be due to a poor connection caused by debris on the charging strip. Alternatively, the charging protection program may have activated because of high or low temperature.
Why does my Worx Lawn Mower vibrate?
If your Worx Lawn Mower is vibrating, the blades may be damaged. Check the condition of the blade disc.
Why does my Worx Landroid WR155E say 'Outside working area!' when it is inside?
If your Worx Lawn Mower displays 'Outside working area!' even when inside its boundary, the boundary wire ends may be clamped incorrectly.
Read all safety warnings and instructions to prevent electric shock, fire, or serious injury.
Covers training and preparation steps for safe operation, including reading instructions and inspecting the area.
General guidelines for operating the lawnmower, including handling, safety checks, and modifications.
Crucial safety advice for handling, charging, and storing the battery pack to prevent hazards.
Visual warnings and safety information related to the Landroid® mower's operation and disposal.
Explains the function of each button and display element on the Landroid® control panel.
Instructions for maintaining sharp blades, including replacement procedures and safety precautions.
Details error messages like PIN errors, blade faults, and wheel motor faults, with corresponding troubleshooting steps.
Steps to resolve error messages related to the mower being trapped, lifted, or upside down.
Troubleshooting for boundary wire issues, 'Outside working area' messages, and connectivity problems.
Troubleshooting blade disc issues, vibration, uneven cutting, and reduced run-times.
Diagnosing issues with boundary wire connection, mower leaving zone, or erratic movement.
General| Model | WR155E |
|---|---|
| Category | Lawn Mower |
| Cutting Width | 20 cm |
| Battery Type | Lithium-Ion |
| Battery Voltage | 20 V |
| Cutting Height Range | 30-60 mm |
| Connectivity | Wi-Fi, Bluetooth |
| Max. Slope | 35% |
| Battery Capacity | 4.0 Ah |
| Charging Time | 120 min |
| Noise Level | 63 dB |
| Blade Type | 3 pivoting blades |
| Weather Resistance | IPX5 |
To Next Page