Worx Landroid WR147E.1 User Manual

Worx Landroid WR147E.1

39 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Owner’s manual

WR147E.1

WR148E

WR165E

WR167E

Original instruction

Questions and Answers:

R
Ralph SteeleAug 21, 2025
What to do if my Worx Lawn Mower is starting to have shorter run-times between charges?
- E
  Eric PowellAug 21, 2025
  If your Worx Landroid Lawn Mower has shorter run times between charges, it could be due to several factors: * Something is clogging the blade disc, creating friction; take off the blade disc and clean it. The grass may be too high or thick. * The blade disc is unbalanced, causing heavy shaking; check the blade disc and blades, remove debris, and replace the blades if needed. * The battery may be old or exhausted; replace the battery. * The working time is up; reset the working time.
S
Sara RodriguezAug 22, 2025
What to do if my Worx Lawn Mower does not charge?
- S
  Spencer WelchAug 22, 2025
  If your Worx Lawn Mower isn't charging, first check that the power cord is properly connected to the charger and that the charger is connected to a suitable power supply. Also, make sure both charging strips on the mower touch the center of the contact strips on the charging base.
E
emily11Aug 25, 2025
How to fix Worx Landroid WR147E.1 if it is not operating at the correct time?
- C
  Christopher AllenAug 25, 2025
  If your Worx Lawn Mower isn't operating at the correct time, check the following: * The clock may not be set correctly; set the clock to the correct time. * The programmed cutting times may be incorrect; change the time settings. * The percentage of weekly operating time set through the app may have changed; set the correct percentage through the app.
S
Stephen JenningsAug 27, 2025
Why does my Worx Landroid WR147E.1 vibrate?
- C
  Cory ReyesAug 27, 2025
  If your Worx Lawn Mower is vibrating, it might be because the blade disc is unbalanced or the blades are damaged. Inspect the blades, replace them if damaged, and remove any debris or foreign objects from the blades and blade disc.
J
Jason MillsAug 28, 2025
What to do if my Worx Landroid WR147E.1 Lawn Mower stops in the working area?
- K
  kramerkristyAug 28, 2025
  If your Worx Landroid Lawn Mower stops in the working area, it might be due to several reasons: * There is an obstacle in the working area; remove the obstacle. * The cutting height is set too low, or the grass is too dense; raise the cutting height gradually. * The extended boundary wire is too long; reduce the length of the boundary wire. * The distance between the lawn's center and the boundary wire is too great; reduce the distance to within 25m.
E
Emily FloresAug 29, 2025
Why won't my Worx Landroid WR147E.1 Lawn Mower correctly dock with the charging base?
- D
  David VazquezAug 29, 2025
  If your Worx Lawn Mower isn't docking correctly, try restarting it, as environmental factors may be interfering. Also, clean the contact pins on the charging base and the charging strip on the Landroid with a cloth to ensure a good connection.
D
Diana WilsonAug 31, 2025
What to do if my Worx Landroid WR147E.1 runs outside the boundary wire?
- A
  Amy VillanuevaAug 31, 2025
  If your Worx Lawn Mower runs outside the boundary wire, doesn't mow within a zone, or behaves erratically near the wire, it could be due to: another robotic mower's boundary wire being too close; ensure at least 1m clearance. In wet conditions, signal leakage may occur at incorrectly joined wires; check and waterproof the joints. There may also be signal leakage from broken insulation; repair the wire with supplied connectors.
S
Stephen WolfSep 2, 2025
What to do if my Worx Landroid WR147E.1 slips out of its working area going down a hill?
- R
  Robert SandersSep 2, 2025
  If your Worx Lawn Mower slips downhill out of its working area, check that the wheels are clean and free of mud to ensure maximum grip.
N
Natalie WilliamsSep 4, 2025
Why does my Worx Landroid WR147E.1 shut off when docking in the charging base?
- J
  Jennifer DavisSep 4, 2025
  Your Worx Lawn Mower may shut off when docking due to: * Over-temperature protection; place the charging base in a shady area or wait until it cools down. * Poor connection; check the LED light on the charging base and the connection between the contact pins on the base and the charging strip.

Worx Landroid WR147E.1 Specifications

General

Type	Robotic Lawn Mower
Cutting Width	18 cm
Cutting Height	30-60 mm
Battery Voltage	20 V
Battery Type	Lithium-Ion
Charging Time	90 min
Run Time	60 min
Maximum Slope	35%
Programmable	Yes
Rain Sensor	Yes
Blade Type	3 pivoting blades
App Control	Yes
Boundary Wire Required	Yes
Battery Capacity	2.0 Ah
Anti-Theft Protection	PIN code

Related product manuals

Preview: Worx Landroid WR140

Worx Landroid WR140

Preview: Worx Landroid WR142E

Worx Landroid WR142E

Worx Landroid WR141E

Preview: Worx Landroid WR165

Worx Landroid WR165

Worx Landroid WR155

Preview: Worx Landroid WR130E

Worx Landroid WR130E

Worx Landroid WR155E

Preview: Worx Landroid WR101SI

Worx Landroid WR101SI

Worx Landroid WR102SI

Worx Landroid WR105SI

Worx Landroid WR106SI

Worx Landroid WR104SI