Quick reference
EN
29
OPERATION MESSAGES
This section contains a guide on operation and potential error messages Landroid displays. There is also a troubleshooting section at the
end that is designed to help you understand and solve any issues.
MESSAGE LANDROID ACTION
Cutting grass Cutting grass according to the mowing schedule.
Raining The rain sensor detects water. Landroid will return to the charging base and stay
there for the time you have programmed it to do so. When dry, Landroid will
automatically begin the rain delay countdown and then return to mow. If you want
Landroid to mow before this, simply turn it off then on again, but only when the rain
sensor is dry, or you can remove the rain delay completely by setting the rain delay
time to zero.
Going home Needs to recharge—during the journey to the base, the cutting blade is stopped in
order to save energy.
Charging ‘Charging’ and charge percentage are displayed.
No working time scheduled Stand-by, needs to be programmed as desired.
Not working today
Stand-by, will start according to mowing schedule.
Work done today
Zone searching According to the setting of ‘Customize work zone’, Landroid is searching a certain
area to mow.
Charge complete Landroid has completed its charging.
Emergency charge Landroid is charging in a powered-off state.
To Next Page
Loading...
