Wed.11/29 09:00PM
STOP
Getting started
EN
20
Get familiar with the control panel
Landroid’s control panel provides the key functions in a minimalistic design.
For advanced functions, the free Landroid app provides further options in a richer interface: your smartphone.
NOW FOR THE EXCITING BIT!
START LANDROID FOR THE FIRST TIME.
Starting Landroid
• Position the Landroid inside the work area
• Press and hold down until the display lights up
• Enter the default PIN code 0000 by pressing four times. The display will show 0000. Press again to confirm
The display will show “PIN code OK”
• Press the button and then the button to confirm. The Landroid will start mowing the lawn
• You can stop the Landroid at any time by pressing the large red button
• To send the Landroid to the charging base, press the button and confirm by pressing .
POWER: turns Landroid on and
off. Desabling device prevents
operation of Landroid
RETURN: back one step
to former menu
START:
start mowing
HOME:
send Landroid to
charging station during
operations and activates
DISPLAY
KNOB: select and enter
To Next Page
Loading...
