Quick reference
EN
36
Landroid fails to connect to the internet. Please check your router has the correct
settings.
Make sure your router is 2.4GHz. If your
router has two settings, please enable
the 2.4GHz band.
Make sure your router is set to 802.11
mode and wireless setting is b/g/n
mixed.
Make sure your router has the SSID
Broadcast function enabled when you
connect the machine with the app.
You can close it after you connect
successfully.
Make sure DHCP function is enabled.
If you changed your Wi-Fi network,
you need to connect Landroid to the new
network.
If you have a “Fritz!box” router,
please make sure activate “Allow
communication between devices in
same network” in the settings.
Please check whether the router
is disconnetcted or Wi-Fi SSID
is changed.
Make sure the router is connected and
Wi-Fi SSID is correct.
Your Landroid beeps when you are
adjusting “month / hour /minute”
It is normal. Anticlockwise to adjust.
Environmental protection
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local
Authority or retailer for recycling advice.
To Next Page
Loading...
Need help?
General
