What to do if my Worx Landroid WR147E.1 slips out of its working area going down a hill?
If your Worx Lawn Mower slips downhill out of its working area, check that the wheels are clean and free of mud to ensure maximum grip.
What to do if my Worx Landroid WR147E.1 runs outside the boundary wire?
If your Worx Lawn Mower runs outside the boundary wire, doesn't mow within a zone, or behaves erratically near the wire, it could be due to: another robotic mower's boundary wire being too close; ensure at least 1m clearance. In wet conditions, signal leakage may occur at incorrectly joined wires; check and waterproof the joints. There may also be signal leakage from broken insulation; repair the wire with supplied connectors.
Why won't my Worx Landroid WR147E.1 Lawn Mower correctly dock with the charging base?
If your Worx Lawn Mower isn't docking correctly, try restarting it, as environmental factors may be interfering. Also, clean the contact pins on the charging base and the charging strip on the Landroid with a cloth to ensure a good connection.
What to do if my Worx Landroid WR147E.1 Lawn Mower stops in the working area?
If your Worx Landroid Lawn Mower stops in the working area, it might be due to several reasons: * There is an obstacle in the working area; remove the obstacle. * The cutting height is set too low, or the grass is too dense; raise the cutting height gradually. * The extended boundary wire is too long; reduce the length of the boundary wire. * The distance between the lawn's center and the boundary wire is too great; reduce the distance to within 25m.
Why does my Worx Landroid WR147E.1 vibrate?
If your Worx Lawn Mower is vibrating, it might be because the blade disc is unbalanced or the blades are damaged. Inspect the blades, replace them if damaged, and remove any debris or foreign objects from the blades and blade disc.
How to fix Worx Landroid WR147E.1 if it is not operating at the correct time?
If your Worx Lawn Mower isn't operating at the correct time, check the following: * The clock may not be set correctly; set the clock to the correct time. * The programmed cutting times may be incorrect; change the time settings. * The percentage of weekly operating time set through the app may have changed; set the correct percentage through the app.
What to do if my Worx Lawn Mower does not charge?
If your Worx Lawn Mower isn't charging, first check that the power cord is properly connected to the charger and that the charger is connected to a suitable power supply. Also, make sure both charging strips on the mower touch the center of the contact strips on the charging base.
General| Type | Robotic Lawn Mower |
|---|---|
| Cutting Width | 18 cm |
| Cutting Height | 30-60 mm |
| Battery Voltage | 20 V |
| Battery Type | Lithium-Ion |
| Charging Time | 90 min |
| Run Time | 60 min |
| Maximum Slope | 35% |
| Programmable | Yes |
| Rain Sensor | Yes |
| Blade Type | 3 pivoting blades |
| App Control | Yes |
| Boundary Wire Required | Yes |
| Battery Capacity | 2.0 Ah |
| Anti-Theft Protection | PIN code |
Provides contact details for support and customer services.
Covers essential safety warnings and general instructions for safe operation.
Crucial instructions to read and keep for future reference.
Guidance on safe usage and familiarization with controls.
Steps to prepare the Landroid and its environment before use.
Basic rules for operating the robotic lawnmower safely.
Specific safety measures for automatic operation and unattended use.
Guidance on cleaning, upkeep, and storing the Landroid.
Advice on electrical protection and inherent risks.
How to safely move and transport the Landroid.
Information on radio frequency exposure and battery pack precautions.
Lists all components included with the Landroid package.
Identifies and explains the different parts of the Landroid.
Explains how the Landroid returns to its charging base.
Details how Landroid manages lawn borders and mowing patterns.
Explains the function of the rain sensor.
Information on how rain affects mowing and delay settings.
Advice for handling extreme weather conditions.
Explains the benefits of Landroid's mulching system.
Describes the Landroid's edge-cutting capability.
How to adjust and set the cutting height.
How to secure the Landroid with a PIN code.
Explains the function of the self-levelling cutting deck.
Step-by-step guide for installing the Landroid yourself.
Emphasizes the importance of planning for a smooth installation.
Discusses options for laying the boundary wire.
Advice on selecting the optimal location for the charging station.
Details the requirements for placing the charging station.
Instructions on laying boundary wire at correct distances.
Guidance for inspecting the lawn before installation.
How to mark areas the Landroid should avoid.
How to handle obstacles in the lawn.
Overview of the main steps for completing the installation.
Steps to securely install the charging station.
How to connect one end of the boundary wire.
Instructions for laying the boundary wire with specific distances.
How to round 90-degree external corners for the boundary wire.
Advice for handling corners less than 90 degrees.
Guidance on using pegs to secure the boundary wire.
How to create separate zones or islands using boundary wire.
Technique for creating perfect 90° angles with the boundary wire.
Final steps to complete the boundary wire loop.
Overview of the final steps to complete the installation.
Connecting the charging station to the power outlet.
Instructions for installing the Landroid's battery.
How to place the Landroid on the charging base correctly.
Procedure for joining boundary wire segments.
Instructions on using waterproof connectors to join boundary wires.
Guide to starting the Landroid for the first time.
Overview of the Landroid's control panel functions.
Step-by-step guide to starting the Landroid.
Overview of the Landroid's control panel.
Overview of advanced settings accessible through the control panel.
How to set the date and time on the Landroid.
How to program daily work schedules for the Landroid.
How to adjust the overall working time for the week.
How to set a single, specific mowing session.
Explains the benefits of connecting the Landroid to the internet.
Prerequisites and steps before connecting to Wi-Fi.
Important Wi-Fi configuration checks for connectivity.
Guidelines for using the Bluetooth function for connection.
Details the augmented reality, scheduling, and statistics features of the app.
Using the app to measure lawn area and tailor schedules.
Guidance on maintaining sharp cutting blades for optimal performance.
Step-by-step instructions for replacing the Landroid's blades.
Instructions for cleaning the Landroid's upper body and bottom.
Specific steps for cleaning the drive wheels.
How to clean charging contacts for reliable charging.
Information on battery care and charging procedures.
Procedures for preparing the Landroid for winter storage.
Checks and procedures for re-starting Landroid after winter.
Importance of software updates and how to perform them.
How to update Landroid software using a USB stick.
Explains various messages displayed by the Landroid during operation.
Lists common error messages, their causes, and solutions.
Continues the list of error messages and their troubleshooting steps.
Addresses errors related to internet connectivity and system status.
Important notes and tips for resolving issues.
Lists symptoms, causes, and solutions for common Landroid problems.
Troubleshooting for charging time, run-time, and docking problems.
Solutions for issues like running outside boundaries or erratic movement.
Steps to resolve problems connecting Landroid to the internet.
Detailed technical specifications for different Landroid models.
Noise emission data for various Landroid models.
Quantities of accessories included or available for each model.
Description of the intended domestic lawn mowing use.
Details Landroid's compliance with EU directives and standards.
Information about the person authorized to compile the technical file.
To Next Page