18
EN
7. Mare sure Port 8883 TCP is open. If it’s blocked (See Fig. 3), please modify the setting.
To connect smartphone to your Landroid
®
:
Step 1: To download the Landroid
®
App, scan the QR code below or download it from Playstore (Google-
Android), AppleStore (Apple-iOS) or our website www.worx.com.
Step 2: Enter the Landroid
®
APP, and then follow the instructions to connect to your Wi-Fi.
*The Serial No. can be found at the rear of Landroid
®
as shown.
NOTE:
1. If your Wi-Fi information changes, Landroid
®
needs to be re-set according to Step 2.
2. When Landroid
®
is located in an area with low or no Wi-Fi signal, instructions sent from the mobile App
may not be executed immediately. Landroid
®
will receive instructions when it returns to an area with good
Wi-Fi signal.
3. For strong Wi-Fi signal to ensure stable connection, it is recommended to install Wi-Fi extenders to
cover areas with weak or no Wi-Fi signal.
Fig. 3
To Next Page
Loading...
