Programming guide
Control Panel and menu
Programming
After you have successfully installed the
Landroid
®
M
, it is now ready to be programmed according to your schedule. To program your
Landroid
®
M
,
simply follow the step by step guide below.
Menu overview
RETURN
Back to proceeding menu
HOMEPAGE
Displays the state of your setting
Select up
Select down
OK
Confirms any setting.
Note: Make sure you confirm your selection within
30 secs or the display will return to previous menu.
POWER ON/OFF
Turns the Landroid
®
M on and off
NUMBER PAD
Input numbers to set time, date
HOME
Sends the Landroid
®
M to its charging base during
operation and activates charging
START
Shortcut key to start mowing.
STOP
To stop the Landroid
®
M during its operation
(Including charging) Release from error alarm.
EN
HOMEPAGE
Language
Time Format
Date Format
Set Date & Time
Rain Start Delay
Auto Work Time
Customize Work Time
Customize Work Area
Activate PIN Code
Change PIN Code
Alarm Level
General Setting
Working Time
Security
Start
To quick start your
Landroid
®
M
, first press until the
Landroid
®
M
turns on and then press .
is the shortcut button to command your
Landroid
®
M to start mowing. Press to keep working and press to make Landroid
®
M go back
for charging and mow the grass near boundary wire at the same time. During Customize work time and Auto work time, Landroid
®
M will return to the
charging station automatically without mowing the grass. The Landroid
®
M will work continuously until it’s out of battery and then it will return to the
charging base. Once charging is complete, the Landroid
®
M will automatically resume mowing or if it has finished mowing it will stay in the charging
base.
Setting
Press OK to enter the submenu. Use the keys to select General setting, Working time or Security. Then press OK.
1. General setting ( )
To Next Page
Need help?
General
