3
PRODUCT SAFETY
GENERAL POWER TOOL SAFETY WARNINGS
WARNING Read all safety warnings and instructions.
Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concerning use of the appliance
in a safe way and understand the hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not be made by children without
supervision.
ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR CHARGER
1. Before charging, read the instructions.
2. Do not use chargers for works other than those for which they are designed.
3. The charging device must be protected from moisture.
4. Do not use the charging device outdoors.
5. Do not open the unit and keep it out of the reach of children.
6. Ensure that the connection between the charger and your equipment is correctly
positioned.
7. Keep charger’s slots free of foreign objects and protect against dirt and humidity. Store
in a dry and frost-free place.
8. When charging your equipment, ensure that the charger is in a well-ventilated area and
away from inflammable materials. Ensure that your equipment and charger are not left
unsupervised during charging.
9. Longer life and better performance can be obtained if your equipment is charged when
the air temperature is between 15°C and 25°C. Do not charge your equipment in air
temperatures below 0°C, or above 45°C.
10. Disconnect from your equipment when not charging or the charging is over.
20V Hub/HubX is specially designed to work with 20V MakerX series tools
BELOW, so do not attempt to use any other devices.
Category Model
20V Cordless Rotary Tool WX739 WX739.X
20V Cordless Angle Grinder WX741 WX741.X
20V Cordless Air Brush WX742 WX742.X
20V Cordless Mini Heat Gun WX743 WX743.X
20V Cordless Wood & Metal Crafter WX744 WX744.X
To Next Page
Loading...
Need help?
General
