Cordless Grass Line Trimmer &
Brushcutter, Attachment-Capable
18
EN
Line length
2 x3m
Battery type
Lithium-ion /
Battery Model WA3014 (4.0Ah) /
Charger Model WA3883 /
Charging time
(approx.)
Battery pack:
4.0Ah (1pc)
4.0Ah (2pcs)
1 hr
2 hrs
/
Machine Weight
5.5kg 4.1kg
**Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal
voltage is 18 volts.
FOR GRASS TRIMMER:
NOISE INFORMATION
A weighted sound pressure L
pA
= 81.5dB(A)
K
pA
1.93dB(A)
A weighted sound power L
wA
= 94.4dB(A)
K
wA
1.93dB(A)
Wear ear protection
VIBRATION INFORMATION
Typical weighted vibration a
h
=2.822m/s
2
Uncertainty K = 1.5m/s²
The declared vibration total value may be used for
comparing one tool with another, and may also be used in a
preliminary assessment of exposure.
WARNING: The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which the tool
is used dependant on the following examples and other
variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is
sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration accessories are used.
And the tool is being used as intended by its design and
these instructions.
This tool may cause hand-arm vibration syndrome if
its use is not adequately managed
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these instructions
and keep well lubricated (where appropriate)
If the tool is to be used regularly then invest in anti
vibration accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
FOR BRUSH CUTTER:
NOISE INFORMATION
A weighted sound pressure L
pA
= 72.53dB(A)
K
pA
3dB(A)
A weighted sound power L
wA
= 92.53dB(A)
K
wA
3dB(A)
Wear ear protection
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined
according to EN 62841:
Vibration emission value:
a
h
= 2.673m/s
2
Uncertainty K = 1.5m/s²
The declared vibration total value and the declared noise
emission value have been measured in accordance with a
standard test method and may be used for comparing one
tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a preliminary
assessment of exposure.
WARNING: The vibration and noise emissions
during actual use of the power tool can differ from
the declared value depending on the ways in which the
tool is used especially what kind of workpiece is processed
dependant on the following examples and other variations
on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and ensuring it
is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration and noise accessories are used.
And the tool is being used as intended by its design and
these instructions.
To Next Page
Loading...
