Why is the cutting time per battery charge too short on my Worx WG163E.9 Trimmer?
If your Worx Trimmer isn't running for very long on a single charge, the grass may be too high, so remove the grass. Another possibility is that the battery hasn't been used for a long period or has only been charged for a short time, or the battery could be defective.
Why does my Worx WG163E.9 run intermittently?
An intermittently running Worx Trimmer can be caused by a defective on/off switch, a motor malfunction, or a battery that is not fully charged. Try replacing the battery.
Why is the battery charge indicator continuously lighting on my Worx WG163E.9?
A continuously lit battery charge indicator on your Worx Trimmer suggests that the battery may not be properly inserted.
General| Type | String trimmer |
|---|---|
| Head type | Nylon line |
| Handle type | D-loop handle |
| Cutting width | 300 mm |
| Line diameter | 1.65 mm |
| Product color | Black, Metallic, Orange |
| Automatic line feed | Yes |
| Line length supplied | 3 m |
| Cutting diameter (max) | - mm |
| Power source | Battery |
| Battery voltage | 20 V |
Weight and Dimensions| Weight | 2000 g |
|---|
General safety warnings and instructions for the product.
Crucial safety precautions and handling guidelines for the battery pack.
Table of common problems, their possible causes, and corrective actions.
To Next Page
