Why is the cutting time per battery charge too short on my Worx Trimmer?
If your Worx Trimmer isn't running for very long on a single charge, the grass may be too high, so remove the grass. Another possibility is that the battery hasn't been used for a long period or has only been charged for a short time, or the battery could be defective.
Why does my Worx Trimmer run intermittently?
An intermittently running Worx Trimmer can be caused by a defective on/off switch, a motor malfunction, or a battery that is not fully charged. Try replacing the battery.
Why is the battery charge indicator continuously lighting on my Worx WG163E.2 Trimmer?
A continuously lit battery charge indicator on your Worx Trimmer suggests that the battery may not be properly inserted.
Read all safety warnings and instructions. Failure to follow may result in injury.
Read instructions carefully, be familiar with controls and correct use of the machine.
Do not dismantle, short-circuit, expose to heat or mechanical shock. Handle leaking battery with care.
Warnings about using correct charger/battery, wearing PPE, line feeding, and cutting line diameter.
Table detailing common issues, their causes, and corrective actions for the trimmer.
General| Power source | Battery |
|---|---|
| Battery voltage | 20 V |
| Type | 2-in-1 Brush cutter & String trimmer |
| Cordless | Yes |
| Head type | Nylon line |
| Product color | Black, Orange |
| Cutting diameter (max) | 300 mm |
To Next Page
