What to do if battery charge indicator does not light up on Worx Trimmer?
If the battery charge indicator does not light up on your Worx Trimmer, ensure the charger is properly plugged in. If it still doesn't light up, the socket outlet, mains cable, or battery charger could be defective; check and replace any defective parts.
Why my Worx Trimmer fails to operate?
If your Worx Trimmer fails to operate, there are a few potential causes. The battery might be discharged, so try charging it. Alternatively, the battery could be too hot or cold; allow it to return to room temperature. In more serious cases, the motor or internal wiring might be damaged, requiring you to contact an authorized service agent.
How to fix command feed that does not work on Worx WG163.9?
If the command feed on your Worx Trimmer isn't working, it could be due to a few reasons. The cutting line might not be wound well, so rewind it. The line could also be tangled, so untangle it. Finally, the line might be used up, so replace it.
Why is my Worx WG163.9 Trimmer not working?
If your Worx Trimmer isn't working, there are several potential causes. First, the battery might be discharged, so try charging it. If the battery is either too hot or too cold, allow it to reach a suitable temperature. It's also possible that the motor is broken, in which case it should be serviced. Finally, damaged internal wiring could be the culprit, requiring inspection and repair.
What to do if command feed does not work on Worx Trimmer?
If the command feed isn't working on your Worx Trimmer, it may be because the cutting line isn't wound well; rewind it properly. Another reason could be that the line is tangled, so untangle it. Finally, the line might be used up, requiring you to replace the cutting line.
What to do if my Worx WG163.9 does not cut?
If your Worx Trimmer isn't cutting, start by checking the cutting line. If the line is broken, replace it. Also, ensure the battery is fully charged. Clear away any grass entangled around the cutting head.
Why doesn't the battery charge indicator light up on my Worx WG163.9 Trimmer?
If the battery charge indicator doesn't light up on your Worx Trimmer, ensure the charger is properly connected. If it still doesn't light up, the socket outlet, mains cable, or battery charger could be defective; test and replace the defective component.
Why is the battery life so short on my Worx WG163.9 Trimmer?
If the cutting time per battery charge is too short on your Worx Trimmer, it could be due to a few reasons. If the battery hasn't been used for a long time or has only been charged for a short term, follow proper battery maintenance guidelines. Also, if the grass is too high, cut it to a more manageable height. Finally, the battery itself might be defective and need replacement.
Why does my Worx WG163.9 run intermittently?
If your Worx Trimmer runs intermittently, it could be due to a few reasons. The motor might be broken, requiring you to contact an authorized service agent. Alternatively, the battery may not be fully charged, so ensure you charge it completely. Lastly, the on/off switch could be defective, also requiring you to contact an authorized service agent.
Why is the battery charge indicator continuously lighting on Worx WG163.9 Trimmer and no charging possible?
If the battery charge indicator is continuously lit and you can't charge your Worx Trimmer, first ensure the battery is properly inserted. Also, check the battery contacts and clean them if they are contaminated.
General| Power Source | Battery |
|---|---|
| Voltage | 20V |
| Weight | 5.3 lbs |
| Battery Type | Lithium-ion |
| Cutting Width | 12 inches |
| Line Diameter | 0.065 inches |
| Type | Cordless String Trimmer |
Covers essential safety practices for all appliances, including environment, attire, and proper usage.
Comprehensive safety warnings for battery packs, covering handling, charging, storage, and disposal.
Detailed technical specifications for various models, including voltage, speed, and weight.
List of accessories provided with different models, such as safety guards, chargers, and battery packs.
Step-by-step guide for assembling the trimmer/edger, including guards and battery installation.
Instructions for operating the trimmer, including automatic and manual line feeding methods.
Procedures for cleaning, storing, and maintaining the tool, with temperature guidelines for battery tools.
Table of common problems, their possible causes, and corrective actions for the trimmer/edger.
To Next Page
