Worx WG163 - User Manual

Other manuals for Worx WG163

Manual28 pages

Instruction Manual32 pages

Questions and Answers

A
Anthony JamesAug 18, 2025
What to do if my Worx WG163 Trimmer does not cut?
- G
  Gregory SchroederAug 18, 2025
  If your Worx Trimmer isn't cutting, it might be due to several reasons. First, the cutting line might be broken, in which case you should replace it. Second, the battery may not be fully charged, so ensure you charge it. Third, the motor could be broken, indicating the need to contact an authorized service agent. Finally, grass might be entangled around the cutting head; clear it to resolve the issue.
S
Scott SimmonsAug 21, 2025
Why my Worx WG163 Trimmer fails to operate?
- C
  Christopher FergusonAug 21, 2025
  If your Worx Trimmer fails to operate, there are a few potential causes. The battery might be discharged, so try charging it. Alternatively, the battery could be too hot or cold; allow it to return to room temperature. In more serious cases, the motor or internal wiring might be damaged, requiring you to contact an authorized service agent.
A
Andre WangAug 23, 2025
How to fix command feed that does not work on Worx WG163 Trimmer?
- K
  kjohnsonAug 23, 2025
  If the command feed on your Worx Trimmer isn't working, it could be due to a few reasons. The cutting line might not be wound well, so rewind it. The line could also be tangled, so untangle it. Finally, the line might be used up, so replace it.
T
Toni JohnsonAug 26, 2025
Why is my Worx Trimmer not working?
- S
  samanthadurhamAug 26, 2025
  If your Worx Trimmer isn't working, there are several potential causes. First, the battery might be discharged, so try charging it. If the battery is either too hot or too cold, allow it to reach a suitable temperature. It's also possible that the motor is broken, in which case it should be serviced. Finally, damaged internal wiring could be the culprit, requiring inspection and repair.
J
Jennifer YuAug 27, 2025
What to do if command feed does not work on Worx WG163?
- J
  Jamie LopezAug 28, 2025
  If the command feed isn't working on your Worx Trimmer, it may be because the cutting line isn't wound well; rewind it properly. Another reason could be that the line is tangled, so untangle it. Finally, the line might be used up, requiring you to replace the cutting line.
C
Christopher BallardAug 30, 2025
What to do if the battery charge indicator is continuously lighting on my Worx Trimmer?
- C
  Carlos AllenAug 30, 2025
  If the battery charge indicator on your Worx Trimmer is continuously lit but charging isn't possible, it may be due to a few reasons. First, the battery might not be properly inserted, so try reinserting it. Second, the battery contacts could be contaminated, so clean them. Finally, the battery itself might be defective, requiring a replacement.
K
Kyle AdamsSep 1, 2025
Why is the cutting time per battery charge too short on my Worx WG163?
- A
  Alexis DunlapSep 1, 2025
  If the cutting time per battery charge is too short on your Worx Trimmer, it could be because the battery hasn't been used for a long time or has only been charged for a short period; fully charge the battery. Also, if the grass is too high, trim it to a manageable height. Lastly, the battery itself might be defective, requiring a replacement.
N
Nicole MillerSep 3, 2025
Why does my Worx WG163 run intermittently?
- S
  Stephanie RodriguezSep 4, 2025
  If your Worx Trimmer runs intermittently, it could be due to a few reasons. The motor might be broken, requiring you to contact an authorized service agent. Alternatively, the battery may not be fully charged, so ensure you charge it completely. Lastly, the on/off switch could be defective, also requiring you to contact an authorized service agent.
M
melvindonaldsonSep 6, 2025
What to do if battery charge indicator does not light up on Worx Trimmer?
- J
  jonesstevenSep 6, 2025
  If the battery charge indicator does not light up on your Worx Trimmer, ensure the charger is properly plugged in. If it still doesn't light up, the socket outlet, mains cable, or battery charger could be defective; check and replace any defective parts.
H
henry03Sep 8, 2025
Why is the battery life so short on my Worx WG163 Trimmer?
- J
  John HartSep 8, 2025
  If the cutting time per battery charge is too short on your Worx Trimmer, it could be due to a few reasons. If the battery hasn't been used for a long time or has only been charged for a short term, follow proper battery maintenance guidelines. Also, if the grass is too high, cut it to a more manageable height. Finally, the battery itself might be defective and need replacement.

Summary

Product Safety

Important Safety Instructions

Read all safety warnings and instructions to prevent electric shock, fire, and serious injury.

General Appliance Safety

General safety guidelines for using appliances, covering environment, children, attire, and tool usage.

Battery Operated Appliance Safety

Safety precautions for battery-operated gardening tools, focusing on handling, charging, and maintenance.

Battery Pack Safety Warnings

Handling and Storage

Guidelines for safe handling, storage, and use of battery packs, including preventing short-circuits and damage.

Assembly & Operation

Assembly Steps

Operation Guide

Line Feeding;Winding Instruction

Automatic Line Feed

Command Feed System

Maintenance

Troubleshooting

Troubleshooting Guide

Table of common problems, their possible causes, and corrective actions for the trimmer.

Worx WG163 Specifications

General

Power Source	Battery
Battery Voltage	20V
Battery Type	Lithium-Ion
Cutting Width	12 inches
Line Diameter	0.065 inches
Adjustable Handle	Yes
Edging Function	Yes
Tilting Head	Yes
Type	String Trimmer