Worx WG163.8 - User Manual

Questions and Answers

B
Barbara DillonJul 28, 2025
What to do if my Worx WG163.8 does not cut?
- S
  shirley51Jul 28, 2025
  If your Worx Trimmer isn't cutting, it might be due to several reasons. First, the cutting line might be broken, in which case you should replace it. Second, the battery may not be fully charged, so ensure you charge it. Third, the motor could be broken, indicating the need to contact an authorized service agent. Finally, grass might be entangled around the cutting head; clear it to resolve the issue.
A
Alexander CoxAug 2, 2025
Why my Worx Trimmer fails to operate?
- A
  Andrew GarciaAug 2, 2025
  If your Worx Trimmer fails to operate, there are a few potential causes. The battery might be discharged, so try charging it. Alternatively, the battery could be too hot or cold; allow it to return to room temperature. In more serious cases, the motor or internal wiring might be damaged, requiring you to contact an authorized service agent.
J
Jason WilliamsAug 6, 2025
How to fix command feed that does not work on Worx Trimmer?
- W
  Whitney BrowningAug 6, 2025
  If the command feed on your Worx Trimmer isn't working, it could be due to a few reasons. The cutting line might not be wound well, so rewind it. The line could also be tangled, so untangle it. Finally, the line might be used up, so replace it.
M
Mr. Jesse TrevinoAug 10, 2025
What to do if the battery charge indicator is continuously lighting on my Worx Trimmer?
- C
  Cassandra CookeAug 10, 2025
  If the battery charge indicator on your Worx Trimmer is continuously lit but charging isn't possible, it may be due to a few reasons. First, the battery might not be properly inserted, so try reinserting it. Second, the battery contacts could be contaminated, so clean them. Finally, the battery itself might be defective, requiring a replacement.
G
gweberAug 14, 2025
Why is the cutting time per battery charge too short on my Worx WG163.8?
- M
  murraybrittanyAug 14, 2025
  If the cutting time per battery charge is too short on your Worx Trimmer, it could be because the battery hasn't been used for a long time or has only been charged for a short period; fully charge the battery. Also, if the grass is too high, trim it to a manageable height. Lastly, the battery itself might be defective, requiring a replacement.
J
James PattonAug 19, 2025
Why does my Worx Trimmer run intermittently?
- B
  bmooreAug 19, 2025
  If your Worx Trimmer runs intermittently, it could be due to a few reasons. The motor might be broken, requiring you to contact an authorized service agent. Alternatively, the battery may not be fully charged, so ensure you charge it completely. Lastly, the on/off switch could be defective, also requiring you to contact an authorized service agent.
B
Brian ParrishAug 23, 2025
What to do if battery charge indicator does not light up on Worx WG163.8?
- C
  cookjonathanAug 23, 2025
  If the battery charge indicator does not light up on your Worx Trimmer, ensure the charger is properly plugged in. If it still doesn't light up, the socket outlet, mains cable, or battery charger could be defective; check and replace any defective parts.

Summary

PRODUCT SAFETY

Important Safety Instructions

Comprehensive safety guidelines covering general appliance use and battery-powered tool operation.

Trimmer & Edger Specific Safety

Additional safety rules for lawn trimmer and edge trimmer operation.

SAFETY WARNINGS FOR BATTERY PACK

Battery Pack Handling and Safety

Detailed warnings for handling, charging, storage, and disposal of battery packs to prevent hazards.

SYMBOLS

Safety and Usage Symbols

Explains essential safety icons and their meanings, including protective gear and battery disposal.

TECHNICAL DATA

ACCESSORIES

ASSEMBLY & OPERATION

Assembly Procedures

Step-by-step instructions for assembling the trimmer/edger components.

Trimming and Edging Operations

Guidance on performing trimming and edging tasks, including adjustments and mode changes.

Line Feeding and Winding

Detailed instructions for automatic, command feed, and manual line feeding and winding.

Maintenance and Cleaning

Guidance on post-use procedures, cleaning, and general maintenance of the tool.

TROUBLESHOOTING

Worx WG163.8 Specifications

General

Type	String Trimmer
Power Source	Battery
Battery Voltage	20V
Voltage	20V
Weight	5.3 lbs
Adjustable Handle	Yes
Edging Capability	Yes
Automatic Line Feed	Yes
Battery Type	Lithium-Ion
Cutting Width	12 inches
Line Diameter	0.065 inches