
Do you have a question about the Worx Nitro WG186E.1 and is the answer not in the manual?
| Battery Voltage | 20V |
|---|---|
| Cutting Width | 30 cm |
| Line Diameter | 1.65 mm |
| Power Source | Battery |
| Battery | Lithium-ion |
| Line Feed System | Auto-Feed |
| Type | Cordless Grass Trimmer |
Read all safety warnings and instructions. Failure to follow may result in electric shock, fire, or serious injury.
Keep work area clean and well lit. Avoid explosive atmospheres and keep bystanders away.
Match plugs to outlets, avoid grounded surfaces, and keep tools dry to prevent electric shock.
Stay alert, use common sense, wear protective equipment, and prevent unintentional starting.
Use the correct tool, do not force it, maintain it, and store it safely.
Recharge with specified charger, use designated packs, keep away from metal, and handle leaks carefully.
Have power tool serviced by qualified personnel using identical replacement parts.
Read instructions, be familiar with controls, never allow unauthorized use, and be responsible for others.
Inspect machine for damage before use. Never operate with people or pets nearby.
Wear eye protection, long trousers, stout shoes. Avoid bad weather and lightning risk.
Disconnect power before maintenance. Use recommended parts. Store out of children's reach.
Instructions on how to start the machine, including safety warnings about the cutting head rotation.
Step-by-step guide for assembling and disassembling the trimmer head using the hex key.
Instructions on how to wind the trimmer line onto the spool within the trimmer head.
Guide to removing the trimmer head and skirt to assemble the brush cutter blade.
How to use the bump-line feed system to automatically feed new trimmer line.
Detailed steps for winding the trimmer line onto the spool, including length and winding direction.
Instructions for storing the trimmer, including using the hanging slot and keeping it in a dry place.
Loading...