Get familiar with
EN
HOW IT WORKS
6
The Off Limits option allows you to define a no-mow zone in your lawn without using the boundary wire.
Laying out an island in the middle of the garden, far away from the borders, can often be complicated, and it usually requires a
great length of wire. With the Off Limits option you just have to install the magnetic strip around the object you want to exclude
from mowing, and you’re good to go.
It’s particularly useful if you have seasonal equipment like paddling pools or trampolines, or if you’ve just finished sowing a part of
the lawn and you want it to settle before allowing Landroid to mow it. Off Limits is also useful if you decide to change the layout
of your garden sometimes after deploying the boundary wire - for example, if you decide to add a flowerbed - so you don’t need
to redo the whole perimeter.
Off Limits comes in two pieces: a box with a sensor to install on your Landroid and a magnetic strip to surround forbidden areas.
The strip does not need to be connected to the perimeter wire, nor to be powered. The sensor detects the magnetic field emitted
by the band and bounces away.
Please be advised that the Cut To Edge function won’t work around the Off Limits strip.
Landroid L 1000 (WR147E and WR147E.1 models) is only compatible with a specific Off Limits module - the WA0892
model. This model is only compatible with Landroid L 1000 (WR147E and WR147E.1 models).
To Next Page
Loading...