Worx WA0863 - Page 8

EN
8
7. Deploy the magnetic strip around the area.
Lay it out at least 32cm away from the area, on its at side and in
a circular or elliptic shape (avoid straight lines and corners).
32cm
7
8. Secure it with the provided pegs. The distance between the
pegs should be around 80cm.
9
9. Use the connector to close the circuit. The ends of the strip inside
the connector need to be at least 2cm long. You can join as many
magnetic strips as you want by using the connectors.
There is no size limit.
32cm 32cm
10
> 2 m > 2 m > 2 m
10. The magnetic strip needs to be laid down at least 2 meters
away from the boundary wire or another Off Limits area.
8
80 cm
Getting started
Remember that you can’t cross the boundary wire with the
magnetic strips!
Avoid lying the magnetic strip in areas where Landroid
can slip (eg. areas with slopes).
11.The Off Limits icon is now active. Touch it to see the status
and to activate/disactivate the option. If the Status shows
“error” contact our support team at https://support.worx-eu-
rope.com
11