1312
Hedge trimmer                          EN
1312
ENVIRONMENTAL 
PROTECTION
Waste electrical products should not 
be disposed of with household waste. 
Please recycle where facilities exist. 
Check with your Local Authority or retailer 
for recycling advice.
PLUG REPLACEMENT(UK & 
IRELAND ONLY)
If you need to replace the fitted plug then 
follow the instructions below.
IMPORTANT
The wires in the mains lead are colored in 
accordance with the following code:
Blue = Neutral
Brown = Live
As the colors of the wires in the mains lead of 
this appliance may not correspond with the 
coloured markings identifying the terminals 
in your plug, proceed as follows. The wire 
which is coloured blue must be connected to 
the terminal which is marked with N. The wire 
which is coloured brown must be connected 
to the terminal which is marked with L.
WARNING! Never connect live or 
neutral wires to the earth terminal of the 
plug. Only fit an approved BS1363/A plug and 
the correct rated fuse.
NOTE: If a moulded plug is fitted and has to 
be removed take great care in disposing of the 
plug and severed cable, it must be destroyed 
to prevent engaging into a socket.
DECLARATION OF 
CONFORMITY
We, 
POSITEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln 
Declare that the product
Description      WORX Hedge Trimmer
Type          WG209E WG210E 
(2-designation of machinery, 
representative of Hedge Trimmer)
Function   trimming hedges and brushes
Complies with the following directives,
Machinery directive 2006/42/EC 
Electromagnetic compatibility directive  
2004/108/EC
RoHS directive 2011/65/EU
Noise emission in the environment by 
equipment for use outdoors directive   
2000/14/EC amended by 2005/88/EC
- Conformity assessment procedure as per 
Annex V
- Measured sound power level 97 dB
- Declared guaranteed sound power level 
100 dB
-  The notified body involved
Name: Intertek Testing & Certification Ltd
Address: Davy Avenue, Knowlhill, Milton 
Keynes, MK5 8NL
Standards conform to,
EN 60745-1  EN 60745-2-15
EN ISO 3744  EN 55014-1 
EN 55014-2  EN 61000-3-2
EN 61000-3-3
The person authorized to compile the 
technical file,
Name    Russell Nicholson
Address  Positec Power Tools (Europe)
Ltd, PO Box 152, Leeds, LS10 9DS, UK
2012/11/26
Leo Yue
POSITEC Quality Manager