Hedge trimmer EN
76
1. REAR HANDLE
2. REAR SWITCH LEVER
3. FRONT SWITCH LEVER
4. FRONT HANDLE
5. SAFETY GUARD
6. BLADE
7. BLADE SHEATH
TECHNICAL DATA
Type WG209E WG210E (2-designation of machinery, representative of Hedge
Trimmer)
WG209E WG210E
Rated voltage 230-240V ~ 50Hz 230-240V ~ 50Hz
Rated power 550W 600W
Rated no load speed 2600/min 2600/min
Cutting length 51cm 60cm
Cutting diameter 24mm 24mm
Machine weight 2.7kg 2.8kg
Protection class
/ II / II
NOISE INFORMATION
A weighted sound pressure L
pA
: 85dB(A) K=3dB(A)
A weighted sound power L
wA
: 100dB(A)
Wear ear protection when sound pressure is over
80dB(A)
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Typical weighted vibration
4.7m/s²
Uncertainty K = 1.5m/s²
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
To Next Page
Loading...
Need help?
General
